“IVM” Gate Valves are Bolted Bonnet, Rising Spindle, Outside Screw & Yoke Type construction. These Gate valves are available with Solid wedge, Flexible wedge, Split wedge, and Parallel sliding wedge designs offer maximum flexibility and option available to customer for their suitable selection. Gate Valve having Deep stuffing box, which provides assure tightness and maximum packing life. Separate properly machined and lapped back seat facilities are provided for replacement of Gland packing when valve is online & under pressure.

We offer extra long, extended bonnet Gate valve for special services. Antifriction thrust bearing is provided in yoke sleeve for higher sizes and classes.

“IVM” Gate valves are offered under any Third party inspection.

Gate Valves are available with Lever Operated, Gear Operated, Pneumatic Cylinder, Hydraulic Cylinder, Electrical Actuator operated along with accessories like Solenoid, Limit Switch, Air Filter Regulator etc.

Special Options Available on Request : * Extended Bonnet design for low temperature and cryogenic services.
* Pressure Seal Bonnet
* Locking Arrangement
* With NACE MR 0175
* Tailor Made Valve

Standards
Design Standard	API 600
Inspection & Testing Standard	API 598
Face To Face	As Per ANSI B 16.10
End Connection	Flanged End To ANSI B 16.5/BS 10 Table   Buttweld End To ANSI B 16.25
Size Range	1" To 16"
Pressure Rating	150# To 1500#

Nomenclature
No.	Part Name	Material
1	Body	ASTM A 216 GR. WCB ASTM A 351 GR. CF 8/ CF 8M / CF3 / CF3M / IS 210 GR. FG 260
2	Bonnet
3	Seat	AISI 410 / 304 / 316 / 304L / 316L
4	Wedge ( Gate )	WCB + 13 % CR. FACE / CF8 / 8M / 3 / 3M
5	Stem	AISI 410 / 304 / 316 / 304L / 316L
6	Back Seat Bush	AISI 410 / 304 / 316 / 304L / 316L
7	Gland Bush	AISI 410 / 304 / 316 / 304L / 316L
8	Gland Flange	C.S. / AISI 410 / 304 / 316 / 304L / 316L
9	Gland Paking	GRAFOIL / P.T.F.E.
10	Gasket	CAF / GRAPHITE ASBESTOS / SP. WOUND
11	Yoke Sleeve	C.S.
12	Bonnet Bolt & Nut	C.S. / B7 / 2H / S.S. 304 / 316 / 304L / 316L
13	Hand Wheel	CAST IRON
14	Hand Wheel Nut	C.S.